Fafnir® YCJT 5/8 Industrial Normal Duty Flange Mount Ball Bearing Unit, 5/8 in Dia Bore, 3 in L Bolt Center-to-Center, 2-Bolt Flange Mount, 3-7/8 in OAL/Dia
YCJT-5/8
MFG #: YCJT 5/8
Requires Quote
Fafnir® Flange Mount Ball Bearing Unit, Industrial Normal Duty, Series: YCJT, 5/8 in Bore, 3 in Bolt Center-to-Center Length, 2-Bolt Flange Mounting, 3-7/8 in Overall Length/Diameter, 1.296 in Overall Depth, 2-1/8 in Overall Height, Set Screw Locking Device, 2400 lb Dynamic/1000 lb Static Load, 7370 rpm Maximum, -30 to 275 deg F, Uncoated
- Incorporates shaft guarding technology, which reduces replacement time, provides shaft protection an
- This series has the same design as the YCJ series, but is mounted with two-bolts instead of four
- All units are equipped with GY-KRRB wide-inner-ring set screw bearings
- Spherical outside diameter of the bearings mounted in the corresponding machined housing seats provi
- The units are factory pre-lubricated
- A grease fitting is provided for relubrication
Incorporates shaft guarding technology, which reduces replacement time, provides shaft protection and prolongs the life of the shaft
This series has the same design as the YCJ series, but is mounted with two-bolts instead of four
All units are equipped with GY-KRRB wide-inner-ring set screw bearings
Spherical outside diameter of the bearings mounted in the corresponding machined housing seats provides the initial self-alignment
The units are factory pre-lubricated
A grease fitting is provided for relubrication