Timken® UCP209-27 UCP200 Industrial Duty Single Row Standard Pillow Block Ball Bearing Unit, 1-11/16 in Dia Bore, 21/23 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-15/32 in OAL x 4-3/16 in OAH
UCP209-111-TIM
MFG #: UCP209-27
$90.46
/ EA
Estimated Delivery in 3 to 4 Business Days
Timken® Pillow Block Ball Bearing Unit, Industrial Duty Single Row Standard, Series: UCP200, 1-11/16 in Bore, 21/23 in Bolt Center-to-Center Length, 2-1/8 in Base to Bore Centerline, 7-15/32 in Overall Length, 2.2515 in Overall Width, 4-3/16 in Overall Height, Two-Bolt Base Mounting, Cylindrical Bore, 2-1/8 in Base Width, Set Screw Locking Device, Triple Lip Seal, Non-Expansion (Fixed) Expansion, 7666 lb Dynamic/4788 lb Static Load, -4 to 212 deg F, 3100 rpm Maximum, Cast Iron, Powder Coated
- UCP pillow blocks are suggested for industrial applications where normal loads are encountered
- Compact, 1-piece housing with 2-bolt mounting can be installed in any position and makes bearing rep
- These units use wide inner ring ball bearings with self aligning spherical outside diameters that co
- Timken® UCP series housed units feature the Timken® set screw locking (UC) bearing insert
- Bearing prelubricated and ready for immediate installation
- Grease fitting supplied for relubrication
- The bonded seal design is well suited for applications involving wet or dirty environments
- Bolt hole spacing dimensions and shaft center location are interchangeable with competitive units
- Housing designed for ease of bearing replacement
- Provides the first level of protection against contamination
- Bonded nitrile rubber seal with an engineered interface to the inner ring
- Helps protect against abrasive wear, extending seal life
- Engineered fit between bearing and housing to improve bearing life
- Precision machined lubrication groove and holes in the outer ring of the bearing
- Steel cage provides effective ball guidance and high temperature service capability
- Improved shaft support over narrow rings, improving bearing life and reducing misalignment
- 120 deg angle minimizes inner ring distortion for smoother running bearing
- Prelubricated with high-quality lithium-based grease, compatible with most industrial greases
- Spherical outer diameter
- CN internal clearance
UCP pillow blocks are suggested for industrial applications where normal loads are encountered
Compact, 1-piece housing with 2-bolt mounting can be installed in any position and makes bearing replacement easy
These units use wide inner ring ball bearings with self aligning spherical outside diameters that compensate for shaft misalignment
Timken® UCP series housed units feature the Timken® set screw locking (UC) bearing insert
Bearing prelubricated and ready for immediate installation
Grease fitting supplied for relubrication
The bonded seal design is well suited for applications involving wet or dirty environments
Bolt hole spacing dimensions and shaft center location are interchangeable with competitive units
Housing designed for ease of bearing replacement
Provides the first level of protection against contamination
Bonded nitrile rubber seal with an engineered interface to the inner ring
Helps protect against abrasive wear, extending seal life
Engineered fit between bearing and housing to improve bearing life
Precision machined lubrication groove and holes in the outer ring of the bearing
Steel cage provides effective ball guidance and high temperature service capability
Improved shaft support over narrow rings, improving bearing life and reducing misalignment
120 deg angle minimizes inner ring distortion for smoother running bearing
Prelubricated with high-quality lithium-based grease, compatible with most industrial greases
Spherical outer diameter
CN internal clearance