SKF® SY 2.15/16 TF SY Series Standard-Duty Pillow Block Ball Bearing Unit, 2-15/16 in Dia Bore, 8-3/32 to 8-31/32 in L Bolt Center-to-Center, 3-1/4 in Base to Bore Centerline, 10-13/16 in OAL x 6-5/8 in OAH
SY2.15/16TF-SKF
MFG #: SY 2.15/16 TF
Requires Quote
SKF® Pillow Block Ball Bearing Unit, Standard-Duty, Series: SY Series, 2-15/16 in Bore, 8-3/32 to 8-31/32 in Bolt Center-to-Center Length, 3-1/4 in Base to Bore Centerline, 10-13/16 in Overall Length, 6-5/8 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.874 in Base Width, Set Screw Locking Device, Single Lip Seal, Non-Expansion (Fixed) Expansion, 16380 lb Dynamic/11930 lb Static Load, 2400 rpm Maximum, Cast Iron, Uncoated
- Prelubricated with a high quality, long life lithium/calcium grease
- Sphered housing bore mates with sphered O.D. of bearing, allows unit to accommodate for initial erro
- Designation permanently laser marked for easy identification of unit
- Grade #10 balls, ground and honed raceways for precision, quiet running and higher speed capacity
- Molded glass fiber reinforced polyamide cage for durability and quiet running
- Slotted bolt holes allow for a range of base bolt spacings and provide for adjustment at installatio
- Solid housing provides a robust base with high break strength
- Set screw locking features two set screws 120 deg apart, this placement of the set screws maximizes
- TF series units consists of the basic seal and a flinger mounted outboard, the flinger provides extr
- Wide inner ring
- YAR series insert
Prelubricated with a high quality, long life lithium/calcium grease
Sphered housing bore mates with sphered O.D. of bearing, allows unit to accommodate for initial errors in alignment
Designation permanently laser marked for easy identification of unit
Grade #10 balls, ground and honed raceways for precision, quiet running and higher speed capacity
Molded glass fiber reinforced polyamide cage for durability and quiet running
Slotted bolt holes allow for a range of base bolt spacings and provide for adjustment at installation
Solid housing provides a robust base with high break strength
Set screw locking features two set screws 120 deg apart, this placement of the set screws maximizes holding power while minimizing inner ring distortion
TF series units consists of the basic seal and a flinger mounted outboard, the flinger provides extra protection of the contact element
Wide inner ring
YAR series insert