Timken® RAK1 7/16 Normal Duty Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 5.126 in L Bolt Center-to-Center, 1.813 in Base to Bore Centerline, 6.563 in OAL x 3.689 in OAH
RAK1-7/16
MFG #: RAK1 7/16
Requires Quote
Timken® Pillow Block Ball Bearing Unit, Normal Duty, Series: RAK, 1-7/16 in Bore, 5.126 in Bolt Center-to-Center Length, 1.813 in Base to Bore Centerline, 6.563 in Overall Length, 2-1/64 in Overall Width, 3.689 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.843 in Base Width, Eccentric Collar Locking Device, Shroud Seal, Non-Expansion (Fixed), 6400 lb Dynamic/3400 lb Static Load, 250 deg F, 3930 rpm Maximum, Cast Iron, Uncoated
- Heavier than our standard block with solid, flat feet for increased strength
- Compact, one-piece housing can be mounted in any position
- Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into
- Pre-lubricated and ready for immediate installation
- Grease fitting for relubrication
- All units are supplied with self-locking collar
- RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings
Heavier than our standard block with solid, flat feet for increased strength
Compact, one-piece housing can be mounted in any position
Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
Pre-lubricated and ready for immediate installation
Grease fitting for relubrication
All units are supplied with self-locking collar
RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings