EATON Crouse-Hinds FlexStation™ EDS31274 1-Gang Dead End Factory Sealed Heavy Duty Selector Switch Control Station, 600 VAC, 10 A, 8NO-4NC Contact, 3/7B/7C/7D/9E/9F/9G NEMA Rating
EDS31274
MFG #: EDS31274
$827.75
/ EA
Estimated Delivery 7 to 10 Business Days
- Manufacturer: Eaton
- Type: 1-Gang Dead End Factory Sealed Heavy Duty
- Series: EDS
- Voltage Rating: 600
- Amperage Rating: 10
- Contact Configuration: 8NO-4NC
- Contact Mode: Maintained
- Actuator: Lever
- NEMA Rating: NEMA 3/7B/7C/7D/9E/9F/9G
- Material: Feraloy® Iron Alloy
- Finish: Electro-Galvanized/Aluminum Acrylic Painted
- Dimensions: 5-7/8 in L x 3-1/2 in W x 3-1/16 in H
- Brand: Crouse-Hinds
EATON Crouse-Hinds FlexStation™ Selector Switch Control Station, 1-Gang Dead End Factory Sealed Heavy Duty, Series: EDS, 600 VAC, 10 A, 8NO-4NC Contact Configuration, Maintained Contact Mode, Lever Actuator, 3/7B/7C/7D/9E/9F/9G NEMA Rating, Feraloy® Iron Alloy, Electro-Galvanized/Aluminum Acrylic Painted, 5-7/8 in L x 3-1/2 in W x 3-1/16 in H
- Factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a h
- 3-position, 4-circuit
- Reduce installation problems
- Reduce installation problems
- Eliminate external seals
- Lower installation costs
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons, prevents accumulation of dirt and entrance
- Standard neoprene covers for front operated pushbuttons, prevents accumulation of dirt and entrance
- Mounting lugs and taper tapped hubs with integral bushings
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and all selector switch co
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and si
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front bu
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bush
- On enclosure with front lever and side rocker type operating handles, threaded type shafts and bushi
- Explosionproof, dust-ignitionproof, rain tight
- 1 in hub
- 4-circuit
- Four-circuit
- 3-position
- Three-position
Factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure, in conjunction with magnetic starters or contactors for remote control of motors
3-position, 4-circuit
Reduce installation problems
Reduce installation problems
Eliminate external seals
Lower installation costs
Improve safety
Are used with general purpose snap and pushbutton type switches
Standard neoprene covers for front operated pushbuttons, prevents accumulation of dirt and entrance of water around operating shafts
Standard neoprene covers for front operated pushbuttons, prevents accumulation of dirt and entrance of water around operating shafts
Mounting lugs and taper tapped hubs with integral bushings
Mounting lugs and taper tapped hubs with integral bushing
Large machine screws for fastening covers to bodies
Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and all selector switch covers
Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
On enclosure with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
Explosionproof, dust-ignitionproof, rain tight
1 in hub
4-circuit
Four-circuit
3-position
Three-position