Crouse-Hinds

Crouse-Hinds Arktite® EBBRA604 WT60 3 Raintight Interlocked Receptacle With Cutler-Hammer Breaker, 480 VAC, 250 VDC, 60 A, 4 Poles, 3 Wires

EBBRA604 WT60 3 MFG #: EBBRA604 WT60 3
$14,001.09 / EA
Non-Stock Item
Crouse-Hinds Arktite® EBBRA604 WT60 3 Raintight Interlocked Receptacle With Cutler-Hammer Breaker, 480 VAC, 250 VDC, 60 A, 4 Poles, 3 Wires
  • Amperage Rating: 60 A
  • Country of Origin: DO
  • Dimensions: 14.06 in W x 10.25 in D x 23.95 in H
  • Manufacturer Name: Eaton
  • Material: Copper-Free Aluminum
  • NEMA Rating: NEMA 3/3R/7B/7C/7D/9F/9G/12
  • Number of Poles: 4
  • Number of Wires: 3
  • Series: EBBR
  • Type: Raintight
  • Voltage Rating: 480 VAC/250 VDC
Crouse-Hinds series Arktite EBBR interlocked receptacles are used as a service outlet for portable equipment in damp, wet, corrosive locations. Applicable in areas which are hazardous due to flammable vapors, gases or combustible dust (e.g. refineries and chemical plants) and in locations where frequent wash downs are necessary or where heavy rain or water spray is prevalent.
QTY
Add to List
  • Item Features
  • Application
  • Includes
  • Standards
  • Rugged, corrosion-resistant, cast copper-free aluminum construction
  • Accepts compatible Arktite® plug of same rating and configuration
  • Mechanical interlock mechanism for dead front construction
  • Receptacles are mechanically interlocked with circuit breakers to provide disconnect means, short circuit protection and thermal time delay overload protection
  • A spring door receptacle, located at the bottom of the unit, is mechanically interlocked with the circuit breaker operating mechanism for safe and dependable operation
  • Plug and receptacle contact cannot be made or broken under load
  • Operating handles can be padlocked in either ON or off positions, breakers are trip-free of the handles and will open under short circuit or overload even if the handle is locked in the ON position
  • Component operating handles located through the right side wall of the body permits visual confirmation of correct component assembly and operation
  • Total compliance to the wiring and room requirements of the national electrical code
  • Semi-clamshell enclosure design, with an external machined flat joint flame path between body and cover makes interior components easily accessible
  • Minimum enclosure to enclosure spacing with little interference between the opened cover and an adjacent enclosure
  • Copper-free aluminum hinges allow the cover to swing well out of the way
  • Stainless steel, quick release, captive, hexagonal cover bolts
  • Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturers breakers
  • Simple, straightforward installation of breaker on pre-drilled mounting plate within enclosure
  • Neoprene cover gasket permanently attached to the cover seals out moisture
  • Bodies have top drilled and tapped entrance for power conduit (11/2 in) plus one at the top and one at the bottom for a breather and drain (1/2 in)
  • Tap-on mounting feet
  • Dust-ignitionproof construction
Industrial Facilities and Factories, Facility, Power Distribution and Control Applications
Circuit Breaker
NEC Certified|UL File No. 1203