Cleveland® C30982 RG-6 Center Cutting Fine Heavy Duty Single End Square End End Mill, 5/8 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-3/4 in OAL, TiCN Coated

97911 MFG #: C30982
Requires Quote
Cleveland® C30982 RG-6 Center Cutting Fine Heavy Duty Single End Square End End Mill, 5/8 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-3/4 in OAL, TiCN Coated
Cleveland® End Mill, Center Cutting Fine Heavy Duty Single End Square End, Series: RG-6, 5/8 in Diameter Cutter, 3-3/4 in Overall Length, 1-5/8 in Length of Cut, 4 Flutes, Spiral Flute, 5/8 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Straight/Weldon Flat Shank, Cobalt 8/M42 HSS, TiCN Coated
QTY
Add to List
  • Center cutting design for rapid plunge cutting
  • High red hardness for high heat conditions
  • Multi-flute end mills deliver a smoother finish and are better for peripheral cuts
  • Multi-flute end mills have a heavy duty cross section for better rigidity
  • Increased number of flutes mean more cutting edges, providing more cutting action
  • Coatings reduce heat and abrasion to increase tool life
  • The increased lubricity of the coating surface reduces material adhesion and built-up edge, enabling
  • Coatings reduce the amount of torque required for machining to allow more efficient use of equipment
  • TiCN (titanium carbonitride) coating in blue-gray color for very aggressive machining of stainless s
  • TiCN coating is extremely hard, wear resistant and increase machining speeds 35 to 50% versus bright
  • Applicable on stainless steel, titanium alloys, nickel alloys and cobalt alloys
Center cutting design for rapid plunge cutting
High red hardness for high heat conditions
Multi-flute end mills deliver a smoother finish and are better for peripheral cuts
Multi-flute end mills have a heavy duty cross section for better rigidity
Increased number of flutes mean more cutting edges, providing more cutting action
Coatings reduce heat and abrasion to increase tool life
The increased lubricity of the coating surface reduces material adhesion and built-up edge, enabling even higher feed rates
Coatings reduce the amount of torque required for machining to allow more efficient use of equipment
TiCN (titanium carbonitride) coating in blue-gray color for very aggressive machining of stainless steels and non-ferrous materials
TiCN coating is extremely hard, wear resistant and increase machining speeds 35 to 50% versus bright speeds
Applicable on stainless steel, titanium alloys, nickel alloys and cobalt alloys