Square D™ 9012GAW4 Electro-Mechanical Pressure Switch, 1.5 to 75 psi Pressure, 3.5 to 15 psi Differential, 1NO-1NC, SPDT-DB Contact, Screw Clamp Connection, 6 A at 120 VAC/0.27 A at 250 VDC Contact

9012GAW4 MFG #: 9012GAW4
Requires Quote
Square D™ 9012GAW4 Electro-Mechanical Pressure Switch, 1.5 to 75 psi Pressure, 3.5 to 15 psi Differential, 1NO-1NC, SPDT-DB Contact, Screw Clamp Connection, 6 A at 120 VAC/0.27 A at 250 VDC Contact
Square D™ Pressure Switch, Electro-Mechanical, 1.5 to 75 psi Pressure, 3.5 to 15 psi Differential, 240 psi Maximum, 1NO-1NC, SPDT-DB Contact Configuration, 6 A at 120 VAC/0.27 A at 250 VDC Contact, 5000000 cycles Operating Cycles, -10 to 185 deg F, Screw Clamp Connection, Nitrile Diaphragm, Aluminum Housing Material, NEMA 4/4X/13 Enclosure, 3.5 in W x 2.63 in D x 5.55 in H Dimensions
QTY
Add to List
  • High shock-resistance
  • High set point stability
  • Internal or external range adjustment
  • No drain line required
  • Dual numerical range scale (psi and kPa)
  • Nitrile diaphragms and zinc plated steel flanges are standard
  • Diaphragms of FKM fluorocarbon or ethylene propylene are available as well as stainless steel flange
  • NC-NO, SPDT-DB, form Z, snap action, silver nickel contact
  • Hydraulic oil (-40 to 250 deg F), non-corrosive liquid, air, non-corrosive gas controlled fluid
  • 1/4 in 18 NPTF conforming to UL 508 fluid connection
  • Regulation between 2 thresholds, adjustable scale
  • 4 screw terminal block
  • Screw clamp terminal, 22 to 12 AWG electrical connection
  • Zinc plated steel flange
  • Nitrile (Buna-N) diaphragm
  • Die cast aluminum alloy 380, 120 operating cycles/min (maximum)
  • 1/2 in NPT conduit entrance cable entry
  • Watertight, dusttight, oiltight and corrosion-resistant (indoor/outdoor) environmental conditions
High shock-resistance
High set point stability
Internal or external range adjustment
No drain line required
Dual numerical range scale (psi and kPa)
Nitrile diaphragms and zinc plated steel flanges are standard
Diaphragms of FKM fluorocarbon or ethylene propylene are available as well as stainless steel flanges
NC-NO, SPDT-DB, form Z, snap action, silver nickel contact
Hydraulic oil (-40 to 250 deg F), non-corrosive liquid, air, non-corrosive gas controlled fluid
1/4 in 18 NPTF conforming to UL 508 fluid connection
Regulation between 2 thresholds, adjustable scale
4 screw terminal block
Screw clamp terminal, 22 to 12 AWG electrical connection
Zinc plated steel flange
Nitrile (Buna-N) diaphragm
Die cast aluminum alloy 380, 120 operating cycles/min (maximum)
1/2 in NPT conduit entrance cable entry
Watertight, dusttight, oiltight and corrosion-resistant (indoor/outdoor) environmental conditions