Onyx 34854 2102M General Purpose Spiral Flute Tap, Right Hand Cutting, M16x1.5 Thread, D6 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, Steam Oxide, HSS
74630
MFG #: 34854
Requires Quote
- Type: Rectangular
- Material: B-120 Fiberglass
- Legend: CAUTION SAFETY GLASSES REQUIRED BEYOND THIS POINT
- Legend Style: Text
- Legend/Background Color: Black on Yellow
- Mounting Type: Corner Hole
- Width: 20
- Height: 14
Onyx Spiral Flute Tap, General Purpose, Series: 2102M, Measurement System: Metric, M16x1.5, Semi-Bottoming Chamfer, 3 Flutes, HSS, Steam Oxide, Class of Fit: D6, Right Hand Cutting, 0.745 in Thread Length, 3-13/16 in Overall Length, Right Hand Flute Direction, D6 Thread Limit
- Reduce neck design and shorter thread length for increased coolant flow to the cutting edge, enhance
- English language
- For tapping a wide range of materials up to 28Rc hardness
- Abrasion and chemical resistant
- Steam oxide over nitride increases wear resistance, reduces friction, reduces galling and chip weldi
- -40 to 194 deg F service temperature
- The spiral flutes draw the chips out of the hole
- 0.0984 in THK material
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cu
- Brady® B120 is a reinforced polyester sign panel with protected graphics
- The sign legends or other graphics are permanently embedded within the sign panel, allowing for use
- Up to 25 years average outdoor durability
- Legend shows no effect after 20000 cycles
- Unlimited shelf life when stored at 70 deg F (21 deg C) and 40 to 50% relative humidity
Reduce neck design and shorter thread length for increased coolant flow to the cutting edge, enhanced chip evacuation and reduced contact between tap and workpiece
English language
For tapping a wide range of materials up to 28Rc hardness
Abrasion and chemical resistant
Steam oxide over nitride increases wear resistance, reduces friction, reduces galling and chip welding, improves chip flow and increases tap lubricant retention
-40 to 194 deg F service temperature
The spiral flutes draw the chips out of the hole
0.0984 in THK material
Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth
Brady® B120 is a reinforced polyester sign panel with protected graphics
The sign legends or other graphics are permanently embedded within the sign panel, allowing for use in the most severe environments
Up to 25 years average outdoor durability
Legend shows no effect after 20000 cycles
Unlimited shelf life when stored at 70 deg F (21 deg C) and 40 to 50% relative humidity