DeWALT® Power-Stud® 7412 Mechanical Anchor, 3/8 in Dia, 2-3/4 in OAL, 1-5/8 in L Thread, Carbon Steel, Zinc Plated
7412
MFG #: 7412
Requires Quote
DeWALT® Power-Stud® Mechanical Anchor, 3/8 in Dia, 2-3/4 in Overall Length, 1-5/8 in Thread Length, Carbon Steel, Zinc Plated, 1-5/8 in Minimum Embedment Depth, 3/8 in Drill, 3/8-16, Threaded Stud Head, UNC, 3560 lb Shear Strength, 1920 lb Tensile
- Fully threaded, heavy and medium duty all-purpose anchor
- Consistent performance in high and low strength concrete
- Length id stamped on each threaded anchor
- Anchor can be installed through standard fixture holes
- Anchors can be installed through the fixture, hole spotting not required
- Anchor design allows for follow-up expansion after setting under tensile loading
- Chamfered impact section prevents damage to threads
- Nominal drill bit diameter same as Anchor diameter
- Length of holes can be over-drilled or bottomless
- Length ID code and identifying marking stamped on head of each Anchor
- Clip design prevents spinning during installation
- Ultimate load capacity: 2240 lb tensile strength when embedded in 2500 psi, 2685 lb tensile strength
- Normal weight concrete, structural light weight concrete and grouted concrete masonry are applicable
- Ultimate load capacity: 2320 lb shear strength when embedded in 2500 psi, 2540 lb shear strength whe
- 3760 lb at 4000 psi and 6000 psi shear strength for concrete
- Ultimate load capacity - 2240 lb tensile strength when embedded in 2500 psi, 2685 lb tensile strengt
- 3040 lb at 4000 psi and 6000 psi tensile strength for normal-weight concrete
- Ultimate load capacity - 2320 lb shear strength when embedded in 2500 psi, 2540 lb shear strength wh
- Allowable load capacity - 580 lb shear strength when embedded in 2500 psi, 635 lb shear strength whe
Fully threaded, heavy and medium duty all-purpose anchor
Consistent performance in high and low strength concrete
Length id stamped on each threaded anchor
Anchor can be installed through standard fixture holes
Anchors can be installed through the fixture, hole spotting not required
Anchor design allows for follow-up expansion after setting under tensile loading
Chamfered impact section prevents damage to threads
Nominal drill bit diameter same as Anchor diameter
Length of holes can be over-drilled or bottomless
Length ID code and identifying marking stamped on head of each Anchor
Clip design prevents spinning during installation
Ultimate load capacity: 2240 lb tensile strength when embedded in 2500 psi, 2685 lb tensile strength when embedded in 3000 psi and 3100 lb tensile strength when embedded in 4000 psi compressive strength concrete
Normal weight concrete, structural light weight concrete and grouted concrete masonry are applicable materials
Ultimate load capacity: 2320 lb shear strength when embedded in 2500 psi, 2540 lb shear strength when embedded in 3000 psi and 2540 lb shear strength when embedded in 4000 psi compressive strength concrete
3760 lb at 4000 psi and 6000 psi shear strength for concrete
Ultimate load capacity - 2240 lb tensile strength when embedded in 2500 psi, 2685 lb tensile strength when embedded in 3000 psi, 3100 lb tensile strength when embedded in 4000 psi normal-weight concrete
3040 lb at 4000 psi and 6000 psi tensile strength for normal-weight concrete
Ultimate load capacity - 2320 lb shear strength when embedded in 2500 psi, 2540 lb shear strength when embedded in 3000 psi/4000 psi normal-weight concrete
Allowable load capacity - 580 lb shear strength when embedded in 2500 psi, 635 lb shear strength when embedded in 3000 psi/4000 psi normal-weight concrete