Cushion-Mount™ Plus 7100053575 Plate Mounting Tape, 25 yd L x 18 in W, 22 mil THK, 2 mil Differential Acrylate Adhesive, Polyethylene Foam Backing, Tan

Our 3M™ Cushion-Mount™ plus plate mounting tape L1120 with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This tan foam plate mounting tape provides high quality process print. 3M™ Cushion-Mount™ plus plate mounting tape L1120 is a tan foam tape that provides high quality process print. It has the air release feature that allows for bubble free mounting. Notably, this flexographic plate mounting tape has excellent resistance to lifting on press and is tolerant of ink contaminants, allowing for easy and clean plate removal. Mounting photopolymer plates to flexographic printing cylinders and sleeves. Used in process printing processes. This cushion tape is manufactured for 20 mil applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting photopolymer plates. Easy plate removal from tape may result in less worker fatigue and plate damage. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting. 3M™ air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique micro-channels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting. For decades, 3M™ products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done.