3M Canada
3M™ 7000123394 4314 Single Coated Open Cell Tape, 18 yd L x 1 in W, 250 mil THK, Acrylic Adhesive, Urethane Foam Backing, Charcoal Gray
5643409
MFG #: 7000123394
$0.00
/
Out Of Stock
- Adhesive Material: Acrylic
- Backing Material: Urethane Foam
- Color: Charcoal Gray
- Country of Origin: US
- Foam Density: 2 cu-ft/lb
- Length: 18 yd
- Manufacturer Name: 3M
- Maximum Operating Temperature: 302 deg F
- Minimum Operating Temperature: -20 deg F
- Series: 4314
- Specifications Met: ASTM D3574/D2240/D1667
- Tensile Strength: 25 psi
- Thickness: 250 mil
- Type: Single Coated Open Cell
- Width: 1 in
3M™ urethane foam tape 4314 is a conformable, low-density, open cell foam tape with a pressure sensitive acrylic adhesive on one side. This tape will adhere to a variety of substrates and can be used in numerous mounting applications to dampen sound and create a clean and durable product. 3M™ urethane foam tape 4314 is 1/4 in THK, comprised of a soft conformable, low-density, open cell foam with a pressure sensitive acrylic adhesive on one side. The adhesive is protected by a silicone treated paper liner. It offers excellent cushioning characteristics while providing high absorbency to seal out moisture, dust and drafts. It can perform under a wide-range of temperatures. Special note - extra care should be taken when handling to avoid damaging tape. 3M™ urethane foam tape 4314 features 3M™ adhesive 430. This pressure sensitive, modified acrylic adhesive provides high initial quick stick to a variety of surfaces and substrates. It has an excellent chemical-resistant and shear holding strength, even at elevated temperatures. Adhesive 430 is designed to perform at temperatures up to 180 deg f (82 deg C) in the short term and 150 deg f (70 deg C) long term. The adhesion of 3M™ single-coated foam tapes is typically satisfactory within 20 min and continues to build with additional time. The adhesive is protected by a thick, silicone treated paper liner and has a firm, high density foam. This design offers an attractive and clean appearance after application. Open cell foams are commonly used between component panels where a deg of separation is needed to dampen or prevent vibration, as a thermal insulation barrier and to protect against contamination, but where a measure of airflow is still necessary, such as with electronic components where airflow helps keeps components cool.
- Item Features
- Application
- Standards
- Excellent cushioning characteristics and high absorbency
- Dampens sounds and absorbs vibration when used in electronic applications
- Offers high initial quick stick to multiple substrates
- Provides excellent shear strength and high temperature performance
- Compressible interior sealing applications
- Clean appearance
- Seals out moisture, dust and drafts
Transportation, Specialty Vehicle, Automotive, Appliance and General Industrial Applications
ASTM D3574|ASTM D2240|ASTM D1667