Guhring
Guhring 9030810254000 3081 Type NF Center Cutting Standard Length Square End Single End High Performance End Mill, 1 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL, nano-A™ Coated
3081025.4
MFG #: 9030810254000
$614.63
/ EA
Estimated Delivery 7 to 10 Business Days
- Manufacturer: Guhring
- Type: Type NF Center Cutting Standard Length Square End Single End
- Series: 3081
- Cutter Diameter: 1
- Overall Length: 4
- Maximum Depth of Cut: 1-1/2
- Number of Flutes: 4
- Flute Type: Spiral
- Shank Diameter: 1
- Cutting Direction: Right Hand
- Helix Angle: 36/38
- Shank Type: Weld-On Flat
- Material: Solid Carbide
- Finish: nano-A™ Coated
- Brand: Guhring
Guhring High Performance End Mill, Type NF Center Cutting Standard Length Square End Single End, Series: 3081, 1 in Diameter Cutter, 4 in Overall Length, 1-1/2 in Length of Cut, 4 Flutes, Spiral Flute, 1 in Shank Diameter, Right Hand Cutting Direction, 36/38 deg Helix Angle, Weldon Flat Shank, Solid Carbide, nano-A™ Coated
- Decreased cutting pressure and power consumption
- Vibration-free operation
- Vibration-free operation
- Increased feed rates possible
- Increased surface qualities
- Improved tool life
- Variable helix
- Variable helix
- Unstable Conditions - Standard cooling, average performance and medium to long-chipping
- Unstable Conditions - Standard cooling, average performance and medium to long-chipping
- RF 100 NF - For materials up to 28 HRc
- RF 100 NF - For materials up to 28 HRc
- 36/38 deg helix angles with innovative roughing geometry for very good workpiece surface finish
- 0.031 in chamfer
- h10 mill diameter tolerance
- h6 shank diameter tolerance
- External coolant
- Applicable on alloyed steel, stainless steel and Ti-special alloys
Decreased cutting pressure and power consumption
Vibration-free operation
Vibration-free operation
Increased feed rates possible
Increased surface qualities
Improved tool life
Variable helix
Variable helix
Unstable Conditions - Standard cooling, average performance and medium to long-chipping
Unstable Conditions - Standard cooling, average performance and medium to long-chipping
RF 100 NF - For materials up to 28 HRc
RF 100 NF - For materials up to 28 HRc
36/38 deg helix angles with innovative roughing geometry for very good workpiece surface finish
0.031 in chamfer
h10 mill diameter tolerance
h6 shank diameter tolerance
External coolant
Applicable on alloyed steel, stainless steel and Ti-special alloys