Sandvik Coromant 5743569 CoroMill® Plura Ball Nose End Mill, 0.078 in Dia Cutter, 0.118 in Length of Cut, 2 Flutes, 0.236 in Dia Shank, 2.952 in OAL, PVD Coated
11527994
MFG #: 5743569
Requires Quote
Sandvik Coromant End Mill, Ball Nose, Series: CoroMill® Plura, 0.078 in Diameter Cutter, 2.952 in Overall Length, 0.118 in Length of Cut, 2 Flutes, 0.236 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: R216.62-02030-AO30G 1610, ISO Code: R216.62-02030-AO30G 1610, Solid Carbide, PVD Coated
- 1610 manufacturer grade
- 2 face effective cutt edge
- Straight chip breaker
- 1 mm Dia core at face
- Without coolant entry
- 1.5 mm L peripheral cylindrical
- No coolant exit
- 1.7 mm Dia neck
- SFW (EFW) feed direction
- Right helix flute hand
- -5.5 deg radial rake
- 1.5 deg axial rake
- 20 mm L usable
- 39 mm overhang
- 0 deg lead
- 1 mm corner radius
- 3 deg ramping
- 80000 r/min
- H7 diameter tolerance class cutting
- 20 life cycle state
1610 manufacturer grade
2 face effective cutt edge
Straight chip breaker
1 mm Dia core at face
Without coolant entry
1.5 mm L peripheral cylindrical
No coolant exit
1.7 mm Dia neck
SFW (EFW) feed direction
Right helix flute hand
-5.5 deg radial rake
1.5 deg axial rake
20 mm L usable
39 mm overhang
0 deg lead
1 mm corner radius
3 deg ramping
80000 r/min
H7 diameter tolerance class cutting
20 life cycle state