3M™ 7000123385 High Tack Transfer Tape, 60 yd L x 3/4 in W, 9.2 mil THK, 5 mil 350 Acrylic Adhesive, Clear

3M™ adhesive transfer tape 9485PC leverages the power of 3M™ high performance acrylic adhesive 350 and is mounted on a tan, 58 lb polycoated kraft paper liner for moisture resistance. This transfer tape is an excellent solution bonding high and low surface energy materials. It can also be used for joining materials that have rougher surfaces. 3M™ adhesive transfer tape 9485PC is a 5 mil (0.127 mm) thick transfer tape consisting of our 3M™ adhesive 350, a modified high performance acrylic adhesive designed for applications requiring high shear strength. The adhesive is a mounted on a tan colored, 58 lb polycoated kraft liner. This liner is moisture resistance and helps to minimize wrinkles. This tape is a high performance, high temperature, solvent free industry standard tape with excellent chemical (such as gasoline, oil sodium chloride, mild acids, alkaloids and more) and moisture resistance. It is a fiber reinforced adhesive, a feature that is important for roll stability in narrow widths. This tape is ideal for joining materials that have rougher surfaces. 3M™ adhesive 350 is a high tack, high performance acrylic adhesive system featuring high initial adhesion to metals and high surface energy plastics. It offers excellent humidity, water, solvent, chemical and short term heat resistance. The adhesive is designed to provide exceptional shear strength, even at elevated temperatures. Shear strength is a measure of resistance to a sliding force along a plane that is parallel to the direction of the force. Adhesive 350 is formulated for temperate exposure up to 450 deg F/232 deg C for short periods of time and up to 300 deg F/149 deg C for extended time frames. In general, 3M™ adhesive transfer tapes are rolls of pressure sensitive adhesive pre-applied to a special release liner. The tape consists of adhesive only and does not have any type of backing material. For application the tape is positioned adhesive side down to a surface and the liner is removed, exposing the backside of the adhesive to receive the secondary substrate.