Simpson Strong-Tie® DIA37S Short Threaded Drop-In Anchor, 3/8 in, 1/2 in Drill, Carbon Steel, 1-9/16 in D Min Embedment
DIA37S
MFG #: DIA37S
Requires Quote
Simpson Strong-Tie® Drop-In Anchor, Short Threaded, 3/8 in Bolt/Rod, 3/8-16, Carbon Steel, 1/2 in Drill, 1-9/16 in Minimum Embedment Depth, 1/4 in Thread Length, UNC, 3/4 in Overall Length, 410 at 3000 psi for Concrete Shear Strength, 335 lb at 3000 psi for Concrete Tensile, Zinc Plated
- Lipped edge (DIAS) eliminates need for precisely drilled hole depth
- Available in coil-thread version for 1/2 in and 3/4 in coil-threaded rod
- Short length (DIAS) enables shallow embedment to help avoid drilling into rebar or pre-stressed/post
- Short drop-in anchors include a setting tool compatible with the anchor to ensure consistent install
- Anchor body meets minimum 70000 psi tensile
- Expander plug meets minimum 50000 psi tensile strength
- A dedicated setting tool is included
- 2600 to 2700 deg F freezing/melting point
- The allowable loads are based on a safety factor of 4
- Allowable loads may not be increased for short-term loading due to wind or seismic forces
- Anchors were installed with a 1 in offset from the centerline of the flute
Lipped edge (DIAS) eliminates need for precisely drilled hole depth
Available in coil-thread version for 1/2 in and 3/4 in coil-threaded rod
Short length (DIAS) enables shallow embedment to help avoid drilling into rebar or pre-stressed/post-tensioned cables
Short drop-in anchors include a setting tool compatible with the anchor to ensure consistent installation
Anchor body meets minimum 70000 psi tensile
Expander plug meets minimum 50000 psi tensile strength
A dedicated setting tool is included
2600 to 2700 deg F freezing/melting point
The allowable loads are based on a safety factor of 4
Allowable loads may not be increased for short-term loading due to wind or seismic forces
Anchors were installed with a 1 in offset from the centerline of the flute