Switch, Conveyor Alignment C/W
AFA20
MFG #: AFA20
$4,889.01
/ EA
Estimated Delivery 7 to 10 Business Days
- Manufacturer: Eaton
- Type: Double End Explosionproof Replacement
- Series: AFA
- Voltage Rating: 600
- Amperage Rating: 15
- Contact Configuration: 2NO
- Action: Snap
- Actuator: Plunger
- Enclosure: NEMA 3/4/IP66
- Mounting: Surface
- Material: Feraloy Iron Alloy
- Dimensions: 5.68 in H x 11.84 in W
- Brand: Crouse-Hinds
Crouse-Hinds Conveyor Belt Control Switch, Alignment Double End Explosionproof Replacement, Series: AFA, 600 VAC, 15 A, 2NO-2NC Contact Configuration, 2 Pole, Plunger Actuator, NEMA 3/4/9E/9F/9G/IP66 Enclosure, Front Mounting, Feraloy® Iron Alloy, Natural
- Finished with precision switches that provide normally open and normally closed contacts
- Furnished with precision switches that provide normally open and normally closed contacts
- Housing consists of a center section which can be mounted either vertically or horizontally and a sw
- Enclosure has three 1 in conduit hubs, cast mounting lugs on 1-1/2 in center permit attachment to th
- Spring loaded operating arm will automatically return switch to normal position when belt interferen
- Operating arm has 3-1/2 in long stainless steel protective roller, approximately 3/4 in lateral move
- Total operating force 50 lb
- Spring loaded operating arm will automatically return switch to normal position when belt interferen
- A severe conveyor belt run-off can rotate the operating arm counter clockwise up to 85 deg without d
- Installation of AFA or AFAX unit on either side of a conveyor belt allows approximately 1 in or a pr
- A typical installation would include a pair of AFA or AFAX units at each end of the conveyor belt wh
Finished with precision switches that provide normally open and normally closed contacts
Furnished with precision switches that provide normally open and normally closed contacts
Housing consists of a center section which can be mounted either vertically or horizontally and a switch housing with an attached switch operating arm
Enclosure has three 1 in conduit hubs, cast mounting lugs on 1-1/2 in center permit attachment to the web of a standard 3 in angle iron
Spring loaded operating arm will automatically return switch to normal position when belt interference is removed
Operating arm has 3-1/2 in long stainless steel protective roller, approximately 3/4 in lateral movement of operating arm actuates switch
Total operating force 50 lb
Spring loaded operating arm will automatically return switch to normal position when belt interference is removed
A severe conveyor belt run-off can rotate the operating arm counter clockwise up to 85 deg without damage to the switch mechanism
Installation of AFA or AFAX unit on either side of a conveyor belt allows approximately 1 in or a pre-determined allowable belt misalignment before switch is actuated
A typical installation would include a pair of AFA or AFAX units at each end of the conveyor belt where belt returns