Lithonia Lighting® OLWX1 LED 40W 50K 347 M4 Low Profile Outdoor Wallpack, LED Lamp, 347 VAC, Bronze Housing
225G3F
MFG #: OLWX1 LED 40W 50K 347 M4
$173.11
/ EA
Estimated Delivery 7 to 10 Business Days
Lithonia Lighting® Outdoor Wallpack, Low Profile, Series: OLWX1, 347 VAC, 0.37 A, LED Lamp, 40 W Lamp, 100000 hr Average Life, 5000 K Color, 70 CRI, Electronic Ballast, Glass Lens, 4079 Lumens, IP65, Surface Mount, Aluminum Housing, Bronze Housing, 8 in H x 7-1/2 in W x 3 in D
- Rugged cast aluminum housing with textured dark bronze polyester powder paint for lasting durability
- Housing is sealed against moisture and environmental contaminants
- Integral heat sinks optimize thermal management through conductive and convective cooling
- High performance LEDs behind clear glass for maximum light output
- LED's are protected behind a glass lens and housing is sealed against moisture and environmental con
- Light engine consists of 1 high efficiency chip on board (COB) LED with integrated circuit board mou
- Electronic driver has a power factor of >90% and total harmonic distortion <20% and a minimum 2.5 kV
- Flood light mounting accessories include an additional 6kV surge protection device
- Easily mounts to recessed junction boxes with the included wall mount bracket or for surface mountin
- Luminaire may be wall or ground mounted in downward or upward orientation
- 0.37 A at 120 VAC, 0.21 A at 208 VAC, 0.19 A at 240 VAC, 0.16 A at 277 VAC, 0.11 A at 347 VAC
- Slipfitter, yoke, knuckle order separately
- Feed-thru wiring can be achieved by using a condulet tee
- Mount on any vertical surface
- Not recommended in applications where a sprayed stream of water can come in direct contact with glas
- Modular design allows for ease of maintenance
Rugged cast aluminum housing with textured dark bronze polyester powder paint for lasting durability
Housing is sealed against moisture and environmental contaminants
Integral heat sinks optimize thermal management through conductive and convective cooling
High performance LEDs behind clear glass for maximum light output
LED's are protected behind a glass lens and housing is sealed against moisture and environmental contaminants (IP65)
Light engine consists of 1 high efficiency chip on board (COB) LED with integrated circuit board mounted directly to the housing to maximize heat dissipation and promote long-life (L73/100000 hours at 25 deg C)
Electronic driver has a power factor of >90% and total harmonic distortion <20% and a minimum 2.5 kVAC surge rating
Flood light mounting accessories include an additional 6kV surge protection device
Easily mounts to recessed junction boxes with the included wall mount bracket or for surface mounting and conduit entry with the included junction box with five 1/2 in threaded conduit entry hubs
Luminaire may be wall or ground mounted in downward or upward orientation
0.37 A at 120 VAC, 0.21 A at 208 VAC, 0.19 A at 240 VAC, 0.16 A at 277 VAC, 0.11 A at 347 VAC
Slipfitter, yoke, knuckle order separately
Feed-thru wiring can be achieved by using a condulet tee
Mount on any vertical surface
Not recommended in applications where a sprayed stream of water can come in direct contact with glass lens
Modular design allows for ease of maintenance