Crouse-Hinds FlexStation™ EDS315 1-Gang Dead End Factory Sealed Heavy Duty Pushbutton Control Station, 600 VAC, 3/7B/7C/7D/9E/9F/9G NEMA Rating

EDS315 MFG #: EDS315
$1,852.37 / EA
Estimated Delivery 7 to 10 Business Days
Crouse-Hinds FlexStation™ EDS315 1-Gang Dead End Factory Sealed Heavy Duty Pushbutton Control Station, 600 VAC, 3/7B/7C/7D/9E/9F/9G NEMA Rating
  • Manufacturer: Eaton
  • Type: 1-Gang Dead End Factory Sealed Heavy Duty
  • Series: EDS
  • Voltage Rating: 600
  • Operator Type: Front
  • Legend: START/STOP
  • NEMA Rating: NEMA 3/7B/7C/7D/9E/9F/9G
  • Material: Feraloy® Iron Alloy
  • Finish: Electro-Galvanized/Aluminum Acrylic Painted
  • Dimensions: 5-7/8 in L x 3-1/2 in W x 3-1/16 in H
  • Brand: Crouse-Hinds
Crouse-Hinds FlexStation™ Pushbutton Control Station, 1-Gang Dead End Factory Sealed Heavy Duty, Series: EDS, 600 VAC, Front Operator, Legend: STOP/START, 3/7B/7C/7D/9E/9F/9G NEMA Rating, Feraloy® Iron Alloy, Electro-Galvanized/Aluminum Acrylic Painted, 5-7/8 in L x 3-1/2 in W x 3-1/16 in H Dimensions
QTY
Add to List
  • Factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a h
  • Reduce installation problems
  • Reduce installation problem
  • Eliminate external seals
  • Lower installation cost
  • Improve safety
  • Are used with general purpose snap and pushbutton type switches
  • Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance o
  • Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance o
  • Mounting lugs and taper tapped hubs with integral bushings
  • Mounting lugs and taper tapped hubs with integral bushing
  • Large machine screws for fastening covers to bodies
  • Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
  • Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and si
  • Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front bu
  • On enclosures with front lever and side rocker type operating handles, threaded type shafts and bush
  • On enclosures with front lever and side rocker type operating handles, threaded type shafts and bush
  • When stop is indicated, button is automatically red, when start is indicated, button is automaticall
  • When stop is indicated, button is automatically red, when start is indicated, button is automaticall
  • Explosionproof, dust ignitionproof, raintight and wet locations construction
  • 1 in hub size
  • 1 in hub
  • 2-circuits
  • Two circuit start-stop
  • For use with EDS/EFS series control stations
Factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure, in conjunction with magnetic starters or contactors for remote control of motors
Reduce installation problems
Reduce installation problem
Eliminate external seals
Lower installation cost
Improve safety
Are used with general purpose snap and pushbutton type switches
Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
Mounting lugs and taper tapped hubs with integral bushings
Mounting lugs and taper tapped hubs with integral bushing
Large machine screws for fastening covers to bodies
Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
When stop is indicated, button is automatically red, when start is indicated, button is automatically green, otherwise, black buttons are standard
When stop is indicated, button is automatically red, when start is indicated, button is automatically green, otherwise, black buttons are standard
Explosionproof, dust ignitionproof, raintight and wet locations construction
1 in hub size
1 in hub
2-circuits
Two circuit start-stop
For use with EDS/EFS series control stations