SKF® SY 2.7/16 TF SY Series Standard-Duty Pillow Block Ball Bearing Unit, 2-7/16 in Dia Bore, 6-7/8 to 7-5/8 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-7/16 in OAL x 5.563 in OAH

SY2.7/16TF-SKF MFG #: SY 2.7/16 TF
$216.55 / EA
Estimated Delivery 7 to 10 Business Days
SKF® SY 2.7/16 TF SY Series Standard-Duty Pillow Block Ball Bearing Unit, 2-7/16 in Dia Bore, 6-7/8 to 7-5/8 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-7/16 in OAL x 5.563 in OAH
  • Manufacturer: SKF
  • Type: Standard Duty
  • Series: SY
  • Bore Diameter: 2-7/16
  • Bolt Center-to-Center Length: 6-7/8 to 7-5/8
  • Base to Bore Centerline: 2-3/4
  • Overall Length: 9-7/16
  • Overall Height: 5.563
  • Mounting Type: Two-Bolt Base
  • Bore Type: Round
  • Base Width: 2.425
  • Locking Device: Setscrew
  • Seal Type: Contact/Lip
  • Expansion Type: Non-Expansion
  • Load Capacity: 11860 lb Dynamic/8100 lb Static
  • Maximum Speed: 3400
  • Material: Cast Iron
  • Finish: Uncoated
  • Brand: SKF®
SKF® Pillow Block Ball Bearing Unit, Standard-Duty, Series: SY Series, 2-7/16 in Bore, 6-7/8 to 7-5/8 in Bolt Center-to-Center Length, 2-3/4 in Base to Bore Centerline, 9-7/16 in Overall Length, 5.563 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.425 in Base Width, Set Screw Locking Device, Single Lip Seal, Non-Expansion (Fixed) Expansion, 11860 lb Dynamic/8100 lb Static Load, 3400 rpm Maximum, Cast Iron, Uncoated
QTY
Add to List
  • Prelubricated with a high quality, long life lithium/calcium grease
  • Sphered housing bore mates with sphered O.D. of bearing, allows unit to accommodate for initial erro
  • Designation permanently laser marked for easy identification of unit
  • Grade #10 balls, ground and honed raceways for precision, quiet running and higher speed capacity
  • Molded glass fiber reinforced polyamide cage for durability and quiet running
  • Slotted bolt holes allow for a range of base bolt spacings and provide for adjustment at installatio
  • Solid housing provides a robust base with high break strength
  • Set screw locking features two set screws 120 deg apart, this placement of the set screws maximizes
  • TF series units consists of the basic seal and a flinger mounted outboard, the flinger provides extr
  • Wide inner ring
  • YAR series insert
Prelubricated with a high quality, long life lithium/calcium grease
Sphered housing bore mates with sphered O.D. of bearing, allows unit to accommodate for initial errors in alignment
Designation permanently laser marked for easy identification of unit
Grade #10 balls, ground and honed raceways for precision, quiet running and higher speed capacity
Molded glass fiber reinforced polyamide cage for durability and quiet running
Slotted bolt holes allow for a range of base bolt spacings and provide for adjustment at installation
Solid housing provides a robust base with high break strength
Set screw locking features two set screws 120 deg apart, this placement of the set screws maximizes holding power while minimizing inner ring distortion
TF series units consists of the basic seal and a flinger mounted outboard, the flinger provides extra protection of the contact element
Wide inner ring
YAR series insert