SKF® SY 2.3/16 FM SY Series Standard-Duty Pillow Block Ball Bearing Unit, 2-3/16 in Dia Bore, 6-15/32 to 6-31/32 in L Bolt Center-to-Center, 2-1/2 in Base to Bore Centerline, 8-5/8 in OAL x 4.969 in OAH

SY2.3/16FM-SKF MFG #: SY 2.3/16 FM
$197.75 / EA
Non-Stock Item
SKF® SY 2.3/16 FM SY Series Standard-Duty Pillow Block Ball Bearing Unit, 2-3/16 in Dia Bore, 6-15/32 to 6-31/32 in L Bolt Center-to-Center, 2-1/2 in Base to Bore Centerline, 8-5/8 in OAL x 4.969 in OAH
  • CustomerPartNumber: 100094, 100141, 100443, 100715, 100985, 101067, 101079, 101091, 101109, 101110, 126261, 126272, 126704, 127797, 153379
  • Request For Quote: No
SKF® Pillow Block Ball Bearing Unit, Standard-Duty, Series: SY Series, 2-3/16 in Bore, 6-15/32 to 6-31/32 in Bolt Center-to-Center Length, 2-1/2 in Base to Bore Centerline, 8-5/8 in Overall Length, 4.969 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.319 in Base Width, Eccentric Collar Locking Device, Single Lip Seal, Non-Expansion (Fixed) Expansion, 9810 lb Dynamic/6530 lb Static Load, 3600 rpm Maximum, Cast Iron, Uncoated
QTY
Add to List
  • Prelubricated with a high quality, long life lithium/calcium grease
  • Sphered housing bore mates with sphered O.D. of bearing, allows unit to accommodate for initial erro
  • Designation permanently laser marked for easy identification of unit
  • Grade #10 balls, ground and honed raceways for precision, quiet running and higher speed capacity
  • Molded glass fiber reinforced polyamide cage for durability and quiet running
  • Slotted bolt holes allow for a range of base bolt spacings and provide for adjustment at installatio
  • Solid housing provides a robust base with high break strength
  • Eccentric self-locking features a machined collar and bearing inner ring which act as mating cams wh
  • FM series units consists of grease-purgeable contact seal is comprised of a wear resistant elastomer
  • Narrow inner ring
  • YET series insert
Prelubricated with a high quality, long life lithium/calcium grease
Sphered housing bore mates with sphered O.D. of bearing, allows unit to accommodate for initial errors in alignment
Designation permanently laser marked for easy identification of unit
Grade #10 balls, ground and honed raceways for precision, quiet running and higher speed capacity
Molded glass fiber reinforced polyamide cage for durability and quiet running
Slotted bolt holes allow for a range of base bolt spacings and provide for adjustment at installation
Solid housing provides a robust base with high break strength
Eccentric self-locking features a machined collar and bearing inner ring which act as mating cams when assembled on the shaft
FM series units consists of grease-purgeable contact seal is comprised of a wear resistant elastomer lip bonded to a steel trash guard
Narrow inner ring
YET series insert