SKF® SY 1. FM SY Series Standard-Duty Pillow Block Ball Bearing Unit, 1 in Dia Bore, 3-3/4 to 4-1/2 in L Bolt Center-to-Center, 1-7/16 in Base to Bore Centerline, 5-1/2 in OAL x 2.781 in OAH

SY1.FM-SKF MFG #: SY 1. FM
$62.30 / EA
Non-Stock Item
SKF® SY 1. FM SY Series Standard-Duty Pillow Block Ball Bearing Unit, 1 in Dia Bore, 3-3/4 to 4-1/2 in L Bolt Center-to-Center, 1-7/16 in Base to Bore Centerline, 5-1/2 in OAL x 2.781 in OAH
  • CustomerPartNumber: 100094, 100141, 100443, 100715, 100985, 101067, 101079, 101091, 101109, 101110, 126261, 126272, 126704, 127797, 153379
  • Request For Quote: No
SKF® Pillow Block Ball Bearing Unit, Standard-Duty, Series: SY Series, 1 in Bore, 3-3/4 to 4-1/2 in Bolt Center-to-Center Length, 1-7/16 in Base to Bore Centerline, 5-1/2 in Overall Length, 2.781 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1-1/2 in Base Width, Eccentric Collar Locking Device, Single Lip Seal, Non-Expansion (Fixed) Expansion, 3150 lb Dynamic/1760 lb Static Load, 7000 rpm Maximum, Cast Iron, Uncoated
QTY
Add to List
  • Prelubricated with a high quality, long life lithium/calcium grease
  • Sphered housing bore mates with sphered O.D. of bearing, allows unit to accommodate for initial erro
  • Designation permanently laser marked for easy identification of unit
  • Grade #10 balls, ground and honed raceways for precision, quiet running and higher speed capacity
  • Molded glass fiber reinforced polyamide cage for durability and quiet running
  • Slotted bolt holes allow for a range of base bolt spacings and provide for adjustment at installatio
  • Solid housing provides a robust base with high break strength
  • Eccentric self-locking features a machined collar and bearing inner ring which act as mating cams wh
  • FM series units consists of grease-purgeable contact seal is comprised of a wear resistant elastomer
  • Narrow inner ring
  • YET series insert
Prelubricated with a high quality, long life lithium/calcium grease
Sphered housing bore mates with sphered O.D. of bearing, allows unit to accommodate for initial errors in alignment
Designation permanently laser marked for easy identification of unit
Grade #10 balls, ground and honed raceways for precision, quiet running and higher speed capacity
Molded glass fiber reinforced polyamide cage for durability and quiet running
Slotted bolt holes allow for a range of base bolt spacings and provide for adjustment at installation
Solid housing provides a robust base with high break strength
Eccentric self-locking features a machined collar and bearing inner ring which act as mating cams when assembled on the shaft
FM series units consists of grease-purgeable contact seal is comprised of a wear resistant elastomer lip bonded to a steel trash guard
Narrow inner ring
YET series insert