SKF® SY 1.15/16 FM SY Series Standard-Duty Pillow Block Ball Bearing Unit, 1-15/16 in Dia Bore, 6 to 6-1/2 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8-1/8 in OAL x 4.563 in OAH

SY1.15/16FM-SKF MFG #: SY 1.15/16 FM
Requires Quote
SKF® SY 1.15/16 FM SY Series Standard-Duty Pillow Block Ball Bearing Unit, 1-15/16 in Dia Bore, 6 to 6-1/2 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8-1/8 in OAL x 4.563 in OAH
SKF® Pillow Block Ball Bearing Unit, Standard-Duty, Series: SY Series, 1-15/16 in Bore, 6 to 6-1/2 in Bolt Center-to-Center Length, 2-1/4 in Base to Bore Centerline, 8-1/8 in Overall Length, 4.563 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.189 in Base Width, Eccentric Collar Locking Device, Single Lip Seal, Non-Expansion (Fixed) Expansion, 7900 lb Dynamic/5220 lb Static Load, 4000 rpm Maximum, Cast Iron, Uncoated
QTY
Add to List
  • Prelubricated with a high quality, long life lithium/calcium grease
  • Sphered housing bore mates with sphered O.D. of bearing, allows unit to accommodate for initial erro
  • Designation permanently laser marked for easy identification of unit
  • Grade #10 balls, ground and honed raceways for precision, quiet running and higher speed capacity
  • Molded glass fiber reinforced polyamide cage for durability and quiet running
  • Slotted bolt holes allow for a range of base bolt spacings and provide for adjustment at installatio
  • Solid housing provides a robust base with high break strength
  • Eccentric self-locking features a machined collar and bearing inner ring which act as mating cams wh
  • FM series units consists of grease-purgeable contact seal is comprised of a wear resistant elastomer
  • Narrow inner ring
  • YET series insert
Prelubricated with a high quality, long life lithium/calcium grease
Sphered housing bore mates with sphered O.D. of bearing, allows unit to accommodate for initial errors in alignment
Designation permanently laser marked for easy identification of unit
Grade #10 balls, ground and honed raceways for precision, quiet running and higher speed capacity
Molded glass fiber reinforced polyamide cage for durability and quiet running
Slotted bolt holes allow for a range of base bolt spacings and provide for adjustment at installation
Solid housing provides a robust base with high break strength
Eccentric self-locking features a machined collar and bearing inner ring which act as mating cams when assembled on the shaft
FM series units consists of grease-purgeable contact seal is comprised of a wear resistant elastomer lip bonded to a steel trash guard
Narrow inner ring
YET series insert