Timken® RAK1 3/16 Normal Duty Pillow Block Ball Bearing Unit, 1-3/16 in Dia Bore, 4.626 in L Bolt Center-to-Center, 1.444 in Base to Bore Centerline, 6.189 in OAL x 3.217 in OAH
RAK1-3/16
MFG #: RAK1 3/16
$0.00
/ EA
Non-Stock Item
- CustomerPartNumber: 100094, 100095, 100443, 100715, 101040, 101079, 101277, 126625, 126702, 126703, 127087, 127375, 127432, 127797, 135900, 136364, 151126
- Request For Quote: No
Timken® Pillow Block Ball Bearing Unit, Normal Duty, Series: RAK, 1-3/16 in Bore, 4.626 in Bolt Center-to-Center Length, 1.444 in Base to Bore Centerline, 6.189 in Overall Length, 1-29/32 in Overall Width, 3.217 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.689 in Base Width, Eccentric Collar Locking Device, Shroud Seal, Non-Expansion (Fixed), 4900 lb Dynamic/2500 lb Static Load, 250 deg F, 4570 rpm Maximum, Cast Iron, Uncoated
- Heavier than our standard block with solid, flat feet for increased strength
- Compact, one-piece housing can be mounted in any position
- Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into
- Pre-lubricated and ready for immediate installation
- Grease fitting for relubrication
- All units are supplied with G-KRRB (R-seal) wide-inner-ring ball bearing and locking collar
- RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings
Heavier than our standard block with solid, flat feet for increased strength
Compact, one-piece housing can be mounted in any position
Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
Pre-lubricated and ready for immediate installation
Grease fitting for relubrication
All units are supplied with G-KRRB (R-seal) wide-inner-ring ball bearing and locking collar
RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings