Timken® RAK1 1/2 Normal Duty Pillow Block Ball Bearing Unit, 1-1/2 in Dia Bore, 5.374 in L Bolt Center-to-Center, 1.937 in Base to Bore Centerline, 7.063 in OAL x 4 in OAH
RAK-1-1/2
MFG #: RAK1 1/2
$0.00
/ EA
Non-Stock Item
- CustomerPartNumber: 126702, 126703
- Request For Quote: Yes
Timken® Pillow Block Ball Bearing Unit, Normal Duty, Series: RAK, 1-1/2 in Bore, 5.374 in Bolt Center-to-Center Length, 1.937 in Base to Bore Centerline, 7.063 in Overall Length, 2-7/32 in Overall Width, 4 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.031 in Base Width, Eccentric Collar Locking Device, Shroud Seal, Non-Expansion (Fixed), 8100 lb Dynamic/4400 lb Static Load, 250 deg F, 3500 rpm Maximum, Cast Iron, Uncoated
- Heavier than our standard block with solid, flat feet for increased strength
- Compact, one-piece housing can be mounted in any position
- Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into
- Pre-lubricated and ready for immediate installation
- Grease fitting for relubrication
- All units are supplied with self-locking collar
- RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings
Heavier than our standard block with solid, flat feet for increased strength
Compact, one-piece housing can be mounted in any position
Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
Pre-lubricated and ready for immediate installation
Grease fitting for relubrication
All units are supplied with self-locking collar
RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings