Timken® RAK1 Normal Duty Pillow Block Ball Bearing Unit, 1 in Dia Bore, 4.126 in L Bolt Center-to-Center, 1.313 in Base to Bore Centerline, 5-1/2 in OAL x 2.748 in OAH
RAK 1
MFG #: RAK1
$0.00
/ EA
Estimated Delivery 7 to 10 Business Days
Timken® Pillow Block Ball Bearing Unit, Normal Duty, Series: RAK, 1 in Bore, 4.126 in Bolt Center-to-Center Length, 1.313 in Base to Bore Centerline, 5-1/2 in Overall Length, 1-3/4 in Overall Width, 2.748 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.469 in Base Width, Eccentric Collar Locking Device, Shroud Seal, Non-Expansion (Fixed), 3600 lb Dynamic/1700 lb Static Load, 250 deg F, 5440 rpm Maximum, Cast Iron, Uncoated
- Heavier than our standard block with solid, flat feet for increased strength
- Compact, one-piece housing can be mounted in any position
- Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into
- Pre-lubricated and ready for immediate installation
- Grease fitting for relubrication
- All units are supplied with self-locking collar
- RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings
Heavier than our standard block with solid, flat feet for increased strength
Compact, one-piece housing can be mounted in any position
Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
Pre-lubricated and ready for immediate installation
Grease fitting for relubrication
All units are supplied with self-locking collar
RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings