Timken® E-PF-TRB-3 15/16 Flange Type E Tapered Roller Bearing Unit, 3-15/16 in Dia Bore, 6.63 in L Bolt Center-to-Center, 6.63 in Dia Bolt Circle, 4-Bolt Piloted Flange Mount, 10-7/8 in OAL/Dia

E-PF-TRB-3 15/16 MFG #: E-PF-TRB-3 15/16
Requires Quote
Timken E-PF-TRB-3 15/16 Mounted Tapered Roller Bearing
  • Manufacturer: Timken
  • Type: Flange
  • Bolt Center-to-Center Length: 5.3000, 6.6300
  • Bolt Circle Diameter: 7.5000, 9.3750
  • Flange Mounting Type: Flange: piloted
  • Overall Length/Diameter: 10.8750, 8.7500
  • Overall Height: 10.8750, 8.7500
  • Locking Device: Set Screw: 2 Locking Collars
  • Bearing Material: Bearing Steel
  • Finish: E-coat
  • Bore Type: Round
  • Brand: Timken®
  • Housing Material: Cast Iron
  • Seal Type: Triple Barrier Seal
  • Shaft Length: 3.0000, 3.9375
Timken® Tapered Roller Bearing Unit, Flange Type E, 3-15/16 in Bore, 6.63 in Bolt Center-to-Center Length, 6.63 in Diameter Bolt Circle, 4-Bolt Piloted Flange Mounting, 10-7/8 in Overall Length/Diameter, 6-1/4 in Overall Depth, Set Screw Locking Device, 26900 lb Dynamic/154000 lb Static Load, 1530 rpm Maximum, -30 to 180 deg F, E-Coated
QTY
Add to List
  • Industry leading high performance triple-barrier seals result in improved grease retention and are m
  • Designed to optimize lip contact
  • Rotating collar acts as an initial flinger and provides an additional barrier
  • Double-lip design
  • Electric deposition coatings on housings and collars provide superior corrosion resistance
  • Electrodeposition coating (E-coat)
  • Set screws with nylon patch greatly reduce set screw back out, even in the most severe applications
  • 65 deg set screw angle for maximum locking power and greatly reduced set screw back-out
  • High performance Timken bearings provide the highest rating and bearing life
  • Set screw with nylon-patch
  • Pilot Flange housing
  • Machined steel
  • 25% more load capacity
  • Optimized bearing profiles
  • Improved surface textures
  • Super-clean, high-alloy bearing steel
  • Material specification ASTM-A48 grade-30 cast-iron
Industry leading high performance triple-barrier seals result in improved grease retention and are more effective at preventing water and mud/slurry ingress
Designed to optimize lip contact
Rotating collar acts as an initial flinger and provides an additional barrier
Double-lip design
Electric deposition coatings on housings and collars provide superior corrosion resistance
Electrodeposition coating (E-coat)
Set screws with nylon patch greatly reduce set screw back out, even in the most severe applications
65 deg set screw angle for maximum locking power and greatly reduced set screw back-out
High performance Timken bearings provide the highest rating and bearing life
Set screw with nylon-patch
Pilot Flange housing
Machined steel
25% more load capacity
Optimized bearing profiles
Improved surface textures
Super-clean, high-alloy bearing steel
Material specification ASTM-A48 grade-30 cast-iron