Sealmaster® 703453 SF Series Non-Expansion Standard-Duty Round/Straight Bore Ball Bearing Unit, 2-15/16 in Dia Bore, 6 in L Bolt Center-to-Center, 4-Bolt Flange Mount, 7-3/4 in OAL/Dia

SF-47C MFG #: 703453
$947.58 / EA
Estimated Delivery 7 to 10 Business Days
Sealmaster® 703453 SF Series Non-Expansion Standard-Duty Round/Straight Bore Ball Bearing Unit, 2-15/16 in Dia Bore, 6 in L Bolt Center-to-Center, 4-Bolt Flange Mount, 7-3/4 in OAL/Dia
Sealmaster® Ball Bearing Unit, Non-Expansion Standard-Duty Round/Straight Bore, Series: SF Series, 2-15/16 in Bore, 6 in Bolt Center-to-Center Length, 4-Bolt Flange Mounting, 7-3/4 in Overall Length/Diameter, 3-3/16 in Overall Depth, 7-3/4 in Overall Height, Set Screw Locking Device, 52100 Steel Bearing, Nitrile Rubber Seal, 14839 lb Dynamic/11224 lb Static Load, 2100 rpm Maximum, 250 deg F, Uncoated
QTY
Add to List
  • Wide outer race
  • Lock pin and dimple system
  • Single lip contact seal consists of a nitrile rubber washer in metal shroud to shield the lip from l
  • Setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vib
  • Zone hardened inner race
  • Land riding retainer
  • Solid bases are standard on Sealmaster® Gold ball bearing pillow blocks
  • All bearings are assembled with a controlled housing fit between the bearing outer ring and housing
  • Metal nameplate riveted to the housing allows for easy identification even after years of operation
  • +/- 2 deg static misalignment
  • Cast iron housing
  • Wide black oxided outer ring with direct lubrication inlet hole
  • Wide zone hardened inner ring
  • GoldPlex® HP grease lubrication
Wide outer race
Lock pin and dimple system
Single lip contact seal consists of a nitrile rubber washer in metal shroud to shield the lip from large contaminants
Setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
Zone hardened inner race
Land riding retainer
Solid bases are standard on Sealmaster® Gold ball bearing pillow blocks
All bearings are assembled with a controlled housing fit between the bearing outer ring and housing bore
Metal nameplate riveted to the housing allows for easy identification even after years of operation
+/- 2 deg static misalignment
Cast iron housing
Wide black oxided outer ring with direct lubrication inlet hole
Wide zone hardened inner ring
GoldPlex® HP grease lubrication