NTN Bearings

NTN 6008LUZ/L627 60 Series Round Bore Standard Small Deep Groove Radial Ball Bearing, 40 mm Dia Bore, 68 mm OD, 1 Rows, 15 mm W, 16800 N Load

6008LUZ/L627-NTN MFG #: 6008LUZ/L627
$0.00 / EA
Estimated Delivery 7 to 10 Business Days
NTN 6008LUZ/L627 60 Series Round Bore Standard Small Deep Groove Radial Ball Bearing, 40 mm Dia Bore, 68 mm OD, 1 Rows, 15 mm W, 16800 N Load
  • Manufacturer: NTN
  • Type: Deep Groove Ball Bearing
  • Bore Diameter: 1.5748 in/40.000 mm
  • Outside Diameter: 2.6772 in
  • Width: 0.5906 in
  • Closure Type: Single Sealed & Single Shielded
  • Load Capacity: 3800 lbf
  • Seal Material: Nitrile Rubber
  • Cage Material: Steel
  • Temperature Rating: 120 ºC
  • Brand: NTN
  • Cage Type: Pressed
NTN Deep Groove Radial Ball Bearing, Round Bore Standard Small, Series: 60 Series, 40 mm Bore, 68 mm OD, 1 Rows, 15 mm Width, Single Shielded/Sealed Closure, 16800 N Load, High Carbon Chrome Steel Bearing, Nitrile Rubber Seal, Pressed Steel Cage, 6100 rpm Grease Maximum, -40 to 120 deg C
QTY
Add to List
  • The sealed V-slot around the inner ring creates an air and grease pocket which increases the labyrin
  • This is a non-contact, low-friction torque type bearing assembly, which can be used effectively for
  • The seal edge forms a double-lip
  • The inner lip touches the V-slot side of the inner rings seal surface
  • There is a slight gap between the inner ring and the outer lip which produces the labyrinth effect
  • Even if friction causes the inner lip to wear, the outer lip constricts around the inner ring to com
  • Due to the fact that it is a contact type seal bearing, the torque will be a little greater but the
  • ISO class 0 precision rating
  • Double-lip single sealed contact nitrile rubber seal
  • Single shielded seal
  • L627 EM Exxon Polyrex prelubricant
  • CN radial clearance
  • 16800 N dynamic/11500 N static
The sealed V-slot around the inner ring creates an air and grease pocket which increases the labyrinth effect
This is a non-contact, low-friction torque type bearing assembly, which can be used effectively for general protection
The seal edge forms a double-lip
The inner lip touches the V-slot side of the inner rings seal surface
There is a slight gap between the inner ring and the outer lip which produces the labyrinth effect
Even if friction causes the inner lip to wear, the outer lip constricts around the inner ring to compensate, and thus constantly preserving the perfect sealing effect
Due to the fact that it is a contact type seal bearing, the torque will be a little greater but the seal will provide the optimum protection from dust penetration
ISO class 0 precision rating
Double-lip single sealed contact nitrile rubber seal
Single shielded seal
L627 EM Exxon Polyrex prelubricant
CN radial clearance
16800 N dynamic/11500 N static