JET JET-KUT® 530107 Tap and Die Set, 40 Pieces, NPT Thread, Hexagon Die

M3x0.5, M3x0.6, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x0.75, M6x1, M7x0.75, M7x1, M8x1, M8x1.25, M10x1.25, M10x1.5, M12x1.5, M12x1.75, 1/8-27 NPT Taps and Dies, Long Handled Adjustable Tap Wrench, T-Handle Tap Wrench for 1/16 to 3/16 in Shank Taps, Hex Die Stock, Slotted Screwdriver, Metric Thread Pitch Gauge and Blow Mould Case

• Industrial construction aluminum die cast body (9X safer than a plastic body)
• Allows use at higher temperatures and better tightening of piping without stripping the threads
• Works on a diaphragm operated, relieving type mechanism with pressure compensated by balanced poppet and can be installed in any position
• Regulator with non raising "press to lock" adjusting knob
• Modular mounting
• Panel mounting
• One of the most commonly used air line accessories, regulators are used to maintain a steady outlet pressure, unaffected by variations/fluctuations in the inlet pressure
• Regulators step down the air line pressure and can be set at any pressure below the inlet air pressure
• To reduce pressure - Pull knob, turn counter clockwise and push it back to lock in position
• Built-in venture for flow compensation
• Inlet pressure 105 psi, supply pressure 90 psi and pressure drop 17 psi
• Aluminum, brass, steel, acetal, stainless steel and nitrile wetted components
• Factory tested

Limited Lifetime