Guhring

Guhring 9030820158700 3082 Type HF Center Cutting Standard Length Square End Single End High Performance End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, FIREX® Coated

3082015.87 MFG #: 9030820158700
$227.10 / EA
Non-Stock Item
Guhring 9030820158700 3082 Type HF Center Cutting Standard Length Square End Single End High Performance End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, FIREX® Coated
  • Country of Origin: DE
  • Cutter Diameter: 5/8 in
  • Cutting Direction: Right Hand
  • Finish: FIREX® Coated
  • Flute Type: Spiral
  • Helix Angle: 30/32 deg
  • Length of Cut: 1-1/4 in
  • Manufacturer Name: Guhring
  • Material: Solid Carbide
  • Number of Flutes: 4
  • Overall Length: 3-1/2 in
  • Request For Quote: No
  • Series: 3082
  • Shank Diameter: 5/8 in
  • Shank Type: Weldon Flat
  • Type: Type HF Center Cutting Standard Length Square End Single End
Based on our RF 100 end mill with variable helix angles in combination with a newly developed roughing geometry. The result is a dramatic increase in tool life in comparison to conventional rough milling cutters with round or flat knuckle-type teeth. At the same time, the surface quality of the workpiece is improved to a peak-to-valley height of appr. Ra = 2 to 3 um making in many cases finishing operations unnecessary. Simultaneously, the innovative design reduces power consumption in comparison to conventional RF 100 end mills allowing the application in unstable conditions and on less powerful machines.
QTY
Add to List
  • Application
  • Standards
  • Item Features
Roughing and Finishing
DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
  • Low cutting pressure and power consumption
  • Vibration-free operation
  • Increased feed rates possible
  • Increased surface qualities
  • Longer tool life
  • Variable helix
  • Unstable Conditions - Standard cooling, average performance and medium to long-chipping
  • RF 100 HF - For materials up to 48 HRc
  • 30/32 deg helix angles with innovative roughing geometry produces smaller chips
  • 0.02 in chamfer
  • h10 mill diameter tolerance
  • h6 shank diameter tolerance
  • External coolant
  • Applicable on unalloyed steel, tool steel, cast iron and Ti-special alloys