Timken®

Timken® UCP209-27 UCP200 Industrial Duty Single Row Standard Pillow Block Ball Bearing Unit, 1-11/16 in Dia Bore, 21/23 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-15/32 in OAL x 4-3/16 in OAH

UCP209-111-TIM MFG #: UCP209-27
$94.08 / EA
Low Stock
Timken® UCP209-27 UCP200 Industrial Duty Single Row Standard Pillow Block Ball Bearing Unit, 1-11/16 in Dia Bore, 21/23 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-15/32 in OAL x 4-3/16 in OAH
  • Base to Bore Centerline: 2-1/8 in
  • Base Width: 2-1/8 in
  • Bolt Center-to-Center Length: 21/23 in
  • Bore Diameter: 1-11/16 in
  • Bore Type: Cylindrical
  • Expansion Type: Non-Expansion
  • Finish: Powder Coated
  • Load Capacity: 34.1 lb Dynamic/21.3 lb Static
  • Locking Device: Set Screw
  • Manufacturer Name: Timken
  • Material: Cast Iron
  • Maximum Speed: 3100 rpm
  • Mounting Type: Two-Bolt Base
  • Overall Height: 4-3/16 in
  • Overall Length: 7-15/32 in
  • Overall Width: 2.2515 in
  • Seal Type: Triple Lip
  • Series: UCP200
  • Temperature Rating: -4 to 212 deg F
  • Type: Industrial Duty Single Row Standard
Timken® U series UCP 200 mounted ball bearings (housed units) feature Timken® U Series set screw locking (UC) style wide inner ring ball bearings, contact nitrile seal and an external flinger to provide multiple levels of protection against contamination. Timken® ball bearings are ideal for handling high speeds and light radial loads.
QTY
Add to List
  • Application
  • Item Features
Materials Handling, Food, Beverage, Agriculture, Packaging, Industrial Fans/Blowers, Glass Making, Brick Making, Paper and Printing Industries
  • UCP pillow blocks are suggested for industrial applications where normal loads are encountered
  • Compact, 1-piece housing with 2-bolt mounting can be installed in any position and makes bearing replacement easy
  • These units use wide inner ring ball bearings with self aligning spherical outside diameters that compensate for shaft misalignment
  • Timken® UCP series housed units feature the Timken® set screw locking (UC) bearing insert
  • Bearing prelubricated and ready for immediate installation
  • Grease fitting supplied for relubrication
  • The bonded seal design is well suited for applications involving wet or dirty environments
  • Bolt hole spacing dimensions and shaft center location are interchangeable with competitive units
  • Housing designed for ease of bearing replacement
  • Provides the first level of protection against contamination
  • Bonded nitrile rubber seal with an engineered interface to the inner ring
  • Helps protect against abrasive wear, extending seal life
  • Engineered fit between bearing and housing to improve bearing life
  • Precision machined lubrication groove and holes in the outer ring of the bearing
  • Steel cage provides effective ball guidance and high temperature service capability
  • Improved shaft support over narrow rings, improving bearing life and reducing misalignment
  • 120 deg angle minimizes inner ring distortion for smoother running bearing
  • Prelubricated with high-quality lithium-based grease, compatible with most industrial greases
  • Spherical outer diameter
  • CN internal clearance