3M Canada

Scotch-Weld™ 7100036721 2-Part Non-Sag Adhesive, 45 mL Container Duo-Pak Cartridge Container, Part A: Clear/Part B: Light Green, 8 to 24 hr at 72 deg F Curing

7100036721 MFG #: 7100036721
$98.75 / EA
Estimated Delivery 7 to 10 Business Days
Scotch-Weld™ 7100036721 2-Part Non-Sag Adhesive, 45 mL Container Duo-Pak Cartridge Container, Part A: Clear/Part B: Light Green, 8 to 24 hr at 72 deg F Curing
  • Base Type: Acrylic
  • Color: Part A: Clear/Part B: Light Green
  • Container Size: 45 mL
  • Container Type: Duo-Pak Cartridge
  • Country of Origin: US
  • Curing Time: 8 to 24 hr at 72 deg F
  • For Use On: ABS, Acrylic, Ceramic, Epoxy To Fiber Reinforced, Glass, Hardboard, Hard To Bond (LSE), High Performance Nylon, Metal, Nylon to Fiber Reinforced, Painted Surface, Plastic, Polypropylene, PVC, Polyolefin and Thermoplastic Elastomer and Wood
  • Functional Cure: 2 hr
  • Manufacturer Name: 3M
  • Mixing Ratio: 10:1
  • Temperature Range:
  • Type: 2-Part Non-Sag
  • VOC Content: Part B: 5.5 g/L
  • Work Life: 10 min
3M™ Scotch-Weld™ structural plastic adhesive DP8010NS is a non-sag, 2-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene and thermoplastic elastomers (TPEs) without special surface preparation. When using a Duo-Pak (DP) size adhesive, rely on 3M™ dispensing equipment for convenient and accurate metering, mixing and dispensing. Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ structural plastic adhesive DP8010NS bonds metals, ceramics and wood and most other plastics. The non-sag formula creates rigid adhesion. We also formulate this adhesive with 8mil spacer beads for bond line spacing. Our 3M™ Scotch-Weld™ acrylic adhesive DP8010NS starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 min work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8 to 24 hr (at 72 deg F/22 deg C). Acrylic adhesives are 2-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.
QTY
Add to List
  • Item Features
  • Standards
  • Application
  • Delivers non-sag formulation so adhesive stays where when applied
  • Resists many chemicals, water, humidity and corrosion
  • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
  • Medium viscosity allows controlled dispensing
  • 10 min worklife with 60 min handling strength
  • Strong adhesive can replace screws, rivets and welding
  • Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
  • Ability to structurally bond polyolefins without special surface preparation
  • Excellent water and humidity resistance
  • 1-step process, no pre-treatment of polyolefin substrates necessary
  • Convenient handheld applicator
  • Ability to bond dissimilar substrates
  • Room temperature cure
  • Very good chemical resistance
  • Solvent free adhesive system
OSHA 29 CFR 1910.1200
General Industrial, Sporting Goods, Solar Energy, Wind Energy, Composites, Electronics, Military, Transportation and Aerospace