Scotch-Weld™ 7100142848 Low Odor Acrylic Adhesive, 200 mL Container Dual-Cartridge Container, Part A: Green/Part B: White, 8 to 24 hr Curing

3M™ Scotch-Weld™ low odor acrylic adhesive DP810 is a toughened 2-part, room temperature curing acrylic adhesive specially formulated to bond oily metals, plastics and other surfaces. With lower odor and non-flammable properties, 3M™ Scotch-Weld™ acrylic adhesive DP810 contributes to a safer work environment compared to typical acrylic adhesives. When using a duo-pak (DP) size adhesive, rely on 3M™ dispensing equipment for convenient and accurate metering, mixing and dispensing. This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end use applications. Making work safer, faster and more efficient, that's just a few of the benefits of 3M™ Scotch-Weld™ low odor acrylic adhesive DP810. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The acrylic adhesive cures to a tan or black color. With a mix ratio is 1:1, 3M™ Scotch-Weld™ low odor acrylic adhesive DP810 provides a 10 min work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 min and is fully cured in 8 to 24 hr (at 72 deg F/22 deg C). 3M™ Scotch-Weld™ low odor acrylic adhesive DP810 is approved under UL 746C, polymeric materials use in electrical equipment. Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are 2-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2-part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.